Husky Corporation

Pressure/vacuum vents

Lets the tank breathe without losing vapour.

Husky pressure/vacuum vents sit on top of the tank vent stack and use three separate valves to control the over-pressure and vacuum conditions that arise in storage tanks. The vacuum valve and the first over-pressure valve are diaphragm operated, giving ten times more sealing force than gravity devices, and a safety over-pressure valve handles high pressure, high flow conditions, venting up to 7900 SCFH at 2 psi/.14 bar.

WhatsApp us
Husky pressure vacuum vent cap for a 2 inch tank vent stack

Model 008060 opens at 6-8" WC/2-2.5 kPa vacuum and 8-12" WC/.75-1.5 kPa pressure; models 004620 (slip-on), 004885 and 005885 (thread-on) open at 6-10" WC vacuum and 2.5-6" WC pressure, with 005885 adding an internal screen. All are built from materials 100% compatible with B0-B20 and E0-E85 fuels. Apex supplies, installs and services Husky P/V vents in Lebanon.

Key features

  • Three separate valves control over-pressure and vacuum in UST and AST vent caps
  • Diaphragm-operated vacuum valve with ten times the sealing force of gravity devices
  • Diaphragm-operated first over-pressure valve, also with ten times the sealing force of gravity devices
  • Safety over-pressure valve vents up to 7900 SCFH at 2 psi/.14 bar
  • Thread-on caps install with a cast-on hex nut, so they tighten without reaching between vent pipes
  • Model 004620 slip-on cap seals at the end of the vent stack with a pliable seal held by four stainless steel set screws
  • Models 004885 and 005885 are certified to less than 1/3 of the CARB EVR standard CP-201, allowing up to three vents without manifolding the vent pipes
  • Aluminium body and deflector, 40 mesh stainless steel screen, stainless steel set screws; 005885 adds an internal screen to protect the pressure plate after a bad bulk drop
  • Materials 100% compatible with B0-B20 and E0-E85
  • 3"/76 mm to 2"/51 mm pipe adapter 005041 and P/V vent test adapter 005426

How it works

How a Husky P/V vent lets a tank breathe without letting vapour out.

A storage tank pulls in air as fuel is drawn out and pushes vapour out as it fills or warms. The vent cap opens only when it must, in either direction.

GRADE ±0.00STORAGE TANK · UST OR ASTvent stack · 2" thread-on capP/V VENT CAPvapour ventedSECTION · NOT TO SCALEcast-on hex nut · 2" / 51 mm threadvacuum valve · diaphragm · opens at 6 to 8" WCover-pressure valve · diaphragm · 8 to 12" WCsafety over-pressure valve · spring · 7900 SCFH at 2 psi40 mesh stainless screen · aluminium bodyHUSKY P/V VENT 008060 · THREE-VALVE CAP12345

Step 01 of 05

The tank breathes through the vent stack

The vent riser runs from the top of an underground or aboveground storage tank to a cap above grade. The Husky cap threads straight onto the 2 in pipe, using the cast-on hex nut so it tightens without reaching between vent pipes.

Model 008060 · 2 in / 51 mm thread-on cap · for UST and AST

Husky Corporation

Product lines

What this range covers

Husky pressure vacuum vent cap, model 008060

P/V vents

Models 008060, 004620, 004885 and 005885 for 2"/51 mm vent stacks, with the 005041 pipe adapter and 005426 test adapter.

Specifications

Models and technical data

Husky P/V vent caps, from the 2026 Husky catalogue pages 221-224. Opening settings in inches of water column (WC). Shipping weight in lb (kg).
ModelFittingVacuum valve opensPressure valve opensNoteWeight lb (kg)
0080602"/51 mm thread-on6-8" WC / 2-2.5 kPa8-12" WC / .75-1.5 kPaSafety valve vents 7900 SCFH at 2 psi/.14 bar1.2 (.54)
0046202"/51 mm slip-on6-10" WC / 1.5-2.5 kPa2.5-6" WC / .63-1.5 kPaPliable end seal, four stainless steel set screws1.2 (.54)
0048852"/51 mm thread-on6-10" WC / 1.5-2.5 kPa2.5-6" WC / .63-1.5 kPaCertified to less than 1/3 of CARB EVR CP-2011.2 (.54)
0058852"/51 mm thread-on6-10" WC / 1.5-2.5 kPa2.5-6" WC / .63-1.5 kPaInternal screen; safety valve vents 7900 SCFH at 2 psi/.14 bar1.2 (.54)
005041Adapter3"/76 mm thread to 2"/51 mm thread pipe adapter
005426Test equipmentPressure/vacuum vent test adapter

Figures from the manufacturer's published documentation. Confirm the final configuration with Apex at quotation stage.

Request a Quotation

Get a quotation for Pressure/vacuum vents.

Tell us the quantities and the site. Apex prepares every quotation for the project, then supplies, installs and services the equipment in Lebanon.

WhatsApp us
Hi Dev