Husky Corporation · Retail fuel nozzles
Husky X nozzle
Automatic shut-off nozzle with Flo-Stop and a simple feature set.
Overview
X is Husky's automatic shut-off nozzle for full-service and self-service stations. It closes when the gas tank is full, and it carries the same body, stainless spout bushing and Flo-Stop device as the higher-specification nozzles.
Husky describes it as the simple route to a durable retail nozzle: one piece die cast aluminium body, polymer handguard, fluorocarbon seals and a two piece polymer EZ Lever. Optional sightglass, Flo-Equalizer, cold weather seals and magnetic handguards let the same nozzle suit different dispensers.
Key features
- Automatic shut-off when the gas tank is full
- Stainless steel reinforced spout bushing keeps the spout tip round and protects the tip-end sensor
- Flo-Stop shuts the nozzle if it falls from the fill neck or is raised above horizontal
- StreamShaper reduces turbulence for straighter flow and less splash back
- One piece die cast aluminium body with high-impact polymer handguard
- Fluorocarbon seals
- Double o-ring packing protected by fiber-reinforced Teflon
- Two piece polymer EZ Lever
- Optional sightglass for a clear view of the fuel
- Optional Flo-Equalizer limits the nozzle to 10 gpm (37.9 L/min)
- Optional cold weather seals rated to -40 degrees F and C
- NPT or BSP inlet, with or without a hold-open clip
Specifications
Husky X nozzle technical data
| Component | Specification |
|---|---|
| Body | One piece die cast aluminium with high-impact polymer handguard |
| Seals | Fluorocarbon |
| Packing | Double o-ring seal protected by fiber-reinforced Teflon |
| Lever | Two piece polymer EZ Lever |
| Inlet | 1 inch (25.4 mm) NPT or 1 inch (25.4 mm) BSP |
| Shut-off | Automatic, when the tank is full |
| Model | Description | Weight |
|---|---|---|
| 159408 | without Hold Open Clip | 2.9 lb / 1.3 kg |
| 159468 | without Hold Open Clip, with 1808 Waffle Splash Guard | 3.0 lb / 1.4 kg |
| 159404N | with Two Notch Hold Open Clip | 2.9 lb / 1.3 kg |
| 159454N | with Two Notch Hold Open Clip and Flo-Equalizer | 3.0 lb / 1.4 kg |
| 159459N | with Two Notch Hold Open Clip and 1808 Waffle Splash Guard | 3.0 lb / 1.4 kg |
Figures from the manufacturer's published documentation. Confirm the final configuration with Apex at quotation stage.
Request a Quotation
Get a quotation for the Husky Corporation Husky X nozzle.
Tell us the quantities and the site. Apex prepares every quotation for the project, then supplies, installs and services the equipment in Lebanon.
